`
Exothermic Welding Products
The mold is made of a semi-permanent graphite and is used for making
the exothermic   connection. Under normal usage, these high
temperature graphite mold can last for an average of 100 or more
connections.
Mould
When making a connection, Flint Igniters are used to ignite the
starting material.
Flint Gun
Slag can be cleaned from the molds by using a Mold Cleaning Spade.
The Mold Cleaning Brush is used to clean the graphite mold
without damaging the mold.
Mould Cleaning Brush
Mould Handle Clamp
Mold Handle Clamps are required for all molds for fixing and locking the
mould to the right position
The exothermic welding process is a simple and efficient method of
welding copper to copper  or copper to steel.  The  welding  process is a
molecular weld. It has the same melting point as copper. The major
advantage is that no external  power is required in the process.  It  uses
high temperature reaction of powdered copper oxide and aluminum.      
The reaction takes place in a semi-permanent graphite mold.
Weld Powder
  • No  external power or heat
    source required.
  • Welded connections never get
    loosened,
  • Welded connections never get
    corroded.
  • Current carrying capacity equal
    to or greater than that of the
    conductor.
  • Electrical resistance doesn't  
    increase.
  • Minimal installation training
    required.
This powder is the one which is melted along with steel Disc from the
weld.  
Benefits
Copyright:  2007-09  McML Protection Technologies Pvt Ltd. All rights reserved.    
Leaders in Lightning Protection & Grounding / Earthing Solutions
Protection Technologies